Always wondered how you connect a TV to a computer? Here is the answer
Almost all modern TVs (Plasma, LCD or TFT) can be connected to the computer (notebook, laptop or PC). These are made almost immediately with a series of cables or connections including VGA, RGB, DVI, HDMI, S-Video or RCA just outside the box. The most common of these compounds is the VGA is probably the easiest way to connect a TV to a computer. Was used for VGA monitors or projectors, the Central Processing Unit (CPU) connect the computer for many years. If youhave a laptop, the cable must be used to connect an external monitor.
There are other ways to ask the same question, whether the connection of computers and televisions, so if you thought one of the following:
o How do you connect the TV to the computer?
How to connect to the computer or TV?
o How do you connect a TV to a computer?
o How do you connect your computer to your TV?
or areIn any case, connecting TV to the computer?
How to connect TV or computer?
Then read on.
If not exactly one of the ports mentioned above can buy from any store electricity or computers. With each of the cable connections can easily create a bridge between the laptop / computer and TV. If your TV equipped (TV) is not with VGA or DVI, the process is not so simple, but it should stillAlso difficult to connect a TV to a computer. You might consider using RCA or S-video TV as a way to connect computers. Is not lost, so encouraging down, if your TV does not have one of these compounds. All we need is a VGA to TV converter, you connect either an S-video or RCA, you are in a very short time. Another way your computer to your TV via HDMI. The only drawback is the TV must be HDMI compatible, this shouldnot be a problem as more and more often in those days. To connect a TV to a computer is a breeze.
If all the necessary connections, you may need to put the TV in order to take the output from your laptop / computer. Here you will find instructions on how to achieve this in the menu on the TV, if it can not be found, then consult your TV manual for instructions. If all connections are tight and get the TV setup your computer properlySignal, you should see on the computer screen on your TV.
If you want the simplest connection possible, you can switch between a computer monitor, television screen, without changing the connections of a fix. I must stress that this is not essential, so you do not have to buy one. If you think you need, is available in most computer or electronic commerce.
For those of you who are a little 'adventurous, you could make a small step further and touchto audio from your computer / laptop. It can take the computer to connect to the TV sound to reach all the connections you need. This may be a mini-stereo male / female, you can run a phono (RCA composite audio) can be performed. The mini-stereo jack goes into the audio output is usually on the back of the computer or the audio output of your laptop. The ends should be Phono audio input on your TV. This would mean there is no output connection to your computer or laptop for speakersThe audio output is the computer / laptop cases and you need a TV mini-jack splitter, which is to install self-explanatory. Now you have two video and audio signals from your computer / laptop and TV.
This was the basics of how to connect the TV to the computer. To go further you can configure and purchase more equipment or improve your home entertainment system.
They made a good start so that will never ask you the following questionsagain.
o How do you connect the TV to the computer?
How to connect to the computer or TV?
o How do you connect your computer to your TV?
There 'something or connecting TV to the computer?
How to connect TV or computer?
o How you can use your computer to your TV?
No comments:
Post a Comment